ZXGD3009E6 datasheet number: ds36885 rev. 1 - 2 1 of 8 www.diodes.com february 2014 ? diodes incorporated ZXGD3009E6 a product line o f diodes incorporated 40v 2a gate driver in sot26 description ZXGD3009E6 is a high-speed non-inve rting single gate driver for switching mosfets. it can transfer up to 2a peak source/sink current into the gate for effective charging and discharging the capacitive load. this gate driver ensures rapid swit ching of the mosfet to minimize power losses and distortion in high cu rrent switching applications. it can typically drive 1a into the low gate impedance with just 10ma input from a controller. also, the turn-on and turn-off switching behavior of the mosfet can be indi vidually tailored to suit an application. in particular, by de fining the switching characteristics appropriately, emi and cross c onduction problems can be reduced. applications power mosfet gate driving in: ? power supplies ? dc-dc converters ? amplifier output stages features ? high-gain buffer with typically 1a output from 10ma input ? emitter-follower that is rugged to latch-up / shoot-through issues ? wide supply voltage to minimize on-losses ? separate source and sink outputs for independent control of mosfet turn-on and turn-off times ? optimized pin-out to simplify pcb layout and reduce parasitic trace inductances ? near-zero quiescent supply current ? totally lead-free & fully rohs compliant (notes 1 & 2) ? halogen and antimony free. ?green? device (note 3) ? qualified to aec-q101 standards for high reliability mechanical data ? case: sot26 ? case material: molded plasti c. ?green? molding compound ul flammability rating 94v-0 ? moisture sensitivity: level 1 per j-std-020 ? terminals: finish - matte ti n plated leads, solderable per mil-std-202, method 208 ? weight: 0.018 grams (approximate) ordering information (note 4) product marking reel size (inches) tape width (mm) quantity per reel ZXGD3009E6ta 3009 7 8 3,000 notes: 1. no purposely added lead. fully eu directiv e 2002/95/ec (rohs) & 2011/6 5/eu (rohs 2) compliant. 2. see http://www.diodes.com/quality/lead_free.html for more in formation about diodes incorporated?s definitions of halogen- a nd antimony-free, "green" and lead-free. 3. halogen- and antimony-free "green? products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total br + cl) and <1000ppm antimony compounds. 4. for packaging details, go to our websit e at http://www.diodes.com /products/packages.html. marking information pin name pin function v cc supply voltage high in driver input v ee supply voltage low source source current output sink sink current output 3009 = product type marking code sot26 top view top view pin-out v cc in v ee source not internally connected sink 3009 internal device schematic
ZXGD3009E6 datasheet number: ds36885 rev. 1 - 2 2 of 8 www.diodes.com february 2014 ? diodes incorporated ZXGD3009E6 a product line o f diodes incorporated absolute maximum ratings (@t a = +25c, unless otherwise specified.) characteristic symbol value unit supply voltage, with respect to v ee v cc 40 v input voltage, with respect to v ee v in 40 v output difference voltage (source ? sink) v (source-sink) 7 v peak pulsed output current (source and sink) i om 3 a peak pulsed input current i im 1 a thermal characteristics (@t a = +25c, unless otherwise specified.) characteristic symbol value unit power dissipation (notes 5 & 6) linear derating factor p d 1.1 8.8 w mw/ c thermal resistance, junction to ambient (notes 5 & 6) r ja 113 c/w thermal resistance, junction to lead (note 7) r jl 105 operating and storage temperature range t j, t stg -55 to +150 c esd ratings (note 8) characteristics symbols value unit jedec class electrostatic discharge ? human body model esd hbm 4,000 v 3a electrostatic discharge ? machine model esd mm 400 v c notes: 5. for a device mounted with pin 1 (v cc ) and pin 3 (v ee ) on 25mm x 25mm 1oz copper that is on a si ngle-sided 1.6mm fr4 pcb; device is measured under still air conditions whilst operating in st eady-state. the heatsink is split in half with pin 1 (v cc ) and pin 3 (v ee ) connected separately to each half. 6. for device with two active die running at equal power. 7. thermal resistance from junction to solder-point at the end of each lead on pin 1 (v cc ) and pin 3 (v ee ). 8. refer to jedec specification jesd22-a114 and jesd22-a115 .
ZXGD3009E6 datasheet number: ds36885 rev. 1 - 2 3 of 8 www.diodes.com february 2014 ? diodes incorporated ZXGD3009E6 a product line o f diodes incorporated electrical characteristics (@t a = +25c, unless otherwise specified.) characteristic symbol min typ max unit test condition output voltage, high v oh v cc - 0.8 v cc - 0.4 v i (source) = 1a, v in = v cc output voltage, low v ol - v ee + 0.2 v ee + 0.5 i (sink) = 1a, v in = v ee supply breakdown voltage bv cc 40 ? ? v i q = 100a, v in = v cc 40 ? ? i q = 100a, v in = v ee = 0v quiescent supply current i q ? ? 20 na v cc = 32v, v in = v cc ? ? 20 v cc = 32v, v in = v ee = 0v peak pulsed source current i (source)m ? 0.98 ? a i in = 10ma, v cc = 5v, v out = 0v peak pulsed sink current i (sink)m ? 0.78 ? i in =-10ma, v ee = 0v, v out = 5v peak pulsed source current i (source)m ? 1.58 ? a i in = 50ma, v cc = 5v, v out = 0v peak pulsed sink current i (sink)m ? 1.38 ? i in =-50ma, v ee = 0v, v out = 5v peak pulsed source current i (source)m ? 2.3 ? a i in = 500ma, v cc = 5v, v out = 0v peak pulsed sink current i (sink)m ? 2.6 ? i in =-500ma, v ee = 0v, v out = 5v peak pulsed source current with varying input resistances i (source)m ? 0.74 0.175 0.019 ? a r in = 100 ? r in = 1k ? r in = 10k ? v cc = 15v, v ee = 0v v in = 15v c l =1nf, r l = 0.18 ? r source = 0 ? , r sink = 0 ? peak pulsed sink current with varying input resistances i (sink)m ? 1.05 0.22 0.025 ? a r in = 100 ? r in = 1k ? r in = 10k ? v cc = 15v, v ee = 0v v in = 15v c l =1nf, r l = 0.18 ? r source = 0 ? , r sink = 0 ? switching times with low input resistance t d(rise) t r t d(fall) t f ? 3.8 15 4 15 ? ns v cc = 12v, v ee = 0v v in = 0 to 10v r in = 25 ? c l = 1nf, r l = 0.18 ? r source = 0 ? , r sink = 0 ? switching times with low load capacitance c l = 1nf t d(rise) t r t d(fall) t f ? 18 36 16 40 ? ns v cc = 15v, v ee = 0v v in = 0 to 15v r in = 1k ? c l = 1nf, r l = 0.18 ? r source = 0 ? , r sink = 0 ? switching times with high load capacitance c l = 10nf t d(rise) t r t d(fall) t f ? 47 210 39 240 ? ns v cc = 15v, v ee = 0v v in = 0 to 15v r in = 1k ? c l = 10nf, r l = 0.18 ? r source = 0 ? , r sink = 0 ? switching times with asymmetric source and sink resistors t d(rise) t r t d(fall) t f ? 42 290 38 235 ? ns v cc = 15v, v ee = 0v v in = 0 to 15v r in = 1k ? c l = 1nf, r l = 0.18 ? r source = 4.7 ? , r sink = 0 ?
ZXGD3009E6 datasheet number: ds36885 rev. 1 - 2 4 of 8 www.diodes.com february 2014 ? diodes incorporated ZXGD3009E6 a product line o f diodes incorporated switching test circuit and timing diagram typical application circuit 10% 90% 90% t r t d(rise) t d(fall) t f v in v out v cc v ee v cc in zxgd3009 source sink r source r sink r in 50 ? 50 ? r l c l v in v out 10% 90% 10% v in v cc zxgd3009 v s v cc source sink r source r sink controller v ee
ZXGD3009E6 datasheet number: ds36885 rev. 1 - 2 5 of 8 www.diodes.com february 2014 ? diodes incorporated ZXGD3009E6 a product line o f diodes incorporated typical switching characteristics (@t a = +25c, unless otherwise specified.) 0 500 1000 1500 2000 2500 3000 -5 0 5 10 15 10 100 1k 10k 100k 1m 1e-4 1e-3 0.01 0.1 1 10 0 250 500 750 1000 1250 1500 0 5 10 15 -100 0 100 200 300 400 500 600 700 800 0 5 10 15 t fall =230ns t ri se =290ns switching speed asymmetric source and sink resistance v in v out t a = 25c v cc =v +in =15v r in = 1k c l = 10nf r l = 0.18 r source =4.7 r sink = 0 voltage (v) time (ns) c l =10nf c l =1nf t a = 25c v cc = 15v v in = 15v square wave supply current supply current (a) (frequency (hz)) c l =0.1nf t a = 25c v cc = 15v v in = 15v r in = 1k c l = 10nf r l = 0.18 v out switching speed voltage (v) time (ns) v in t a = 25c v cc = 15v v in = 15v r in = 1k c l = 1nf r l = 0.18 v out v in switching speed time (ns) voltage (v)
ZXGD3009E6 datasheet number: ds36885 rev. 1 - 2 6 of 8 www.diodes.com february 2014 ? diodes incorporated ZXGD3009E6 a product line o f diodes incorporated typical switching characteristics (@t a = +25c, unless otherwise specified.) 0.1 1 10 1 10 100 1000 0.1 1 10 1 10 100 1000 100 1k 10k 0.01 0.1 1 10 100 1k 10k 0.01 0.1 1 10 0.1 1 10 10 100 1000 0.1 1 10 10 100 1000 r in =100 r in =1k r in =10k turn-on delay time t a = 25c v cc = 15v v in = 15v r l = 0.18 t d(rise) (ns) c l load capacitance (nf) r in =100 r in =1k r in =10k turn-off delay time t a = 25c v cc = 15v v in = 15v r l = 0.18 t d(fall) (ns) c l load capacitance (nf) c l =10nf c l =0.1nf c l =1nf source current vs. input resistance t a = 25c v cc = 15v v in = 15v r l = 0.18 peak source current (a) r in input resistance ( ) c l =1nf c l =10nf c l =0.1nf t a = 25c v cc = 15 v in = 15v r l = 0.18 sink current vs. input resistance peak sink current (a) r in input resistance ( ) r in =100 r in =1k r in =10k t a = 25c v cc = 15v v in = 15v r l = 0.18 turn-on rise time t r (ns) c l load capacitance (nf) r in =1k r in =100 r in =10k t a = 25c v cc = 15v v in = 15v r l = 0.18 turn-off fall time c l load capacitance (nf) t f (ns)
ZXGD3009E6 datasheet number: ds36885 rev. 1 - 2 7 of 8 www.diodes.com february 2014 ? diodes incorporated ZXGD3009E6 a product line o f diodes incorporated package outline dimensions please see ap02002 at http://www.diodes.com /datasheets/ap02002.pdf for latest version. suggested pad layout please see ap02001 at http://www.diodes.com/dat asheets/ap02001.pdf for the latest version. sot26 dim min max typ a 0.35 0.50 0.38 b 1.50 1.70 1.60 c 2.70 3.00 2.80 d ? ? 0.95 h 2.90 3.10 3.00 j 0.013 0.10 0.05 k 1.00 1.30 1.10 l 0.35 0.55 0.40 m 0.10 0.20 0.15 0 8 ? all dimensions in mm dimensions value (in mm) z 3.20 g 1.60 x 0.55 y 0.80 c1 2.40 c2 0.95 a m j l d b c h k x z y c1 c2 c2 g
ZXGD3009E6 datasheet number: ds36885 rev. 1 - 2 8 of 8 www.diodes.com february 2014 ? diodes incorporated ZXGD3009E6 a product line o f diodes incorporated important notice diodes incorporated makes no warranty of any kind, express or implied, with regards to this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose (and their equivalents under the laws of any jurisdiction). diodes incorporated and its subsidiaries rese rve the right to make modifications, enhanc ements, improvements, corrections or ot her changes without further notice to this document and any product descri bed herein. diodes incorporated does not assume any liability ari sing out of the application or use of this document or any product described herein; neither does diodes incorporated convey any license under its patent or trademark rights, nor the rights of others. any customer or user of this document or products described herein in such applica tions shall assume all risks of such use and will agree to hold diodes incorporated and all the companies whose products are represented on diodes incorporated website, harmless against all damages. diodes incorporated does not warrant or accept any liability w hatsoever in respect of any products purchased through unauthoriz ed sales channel. should customers purchase or use diodes inco rporated products for any unintended or una uthorized application, customers shall i ndemnify and hold diodes incorporated and its representativ es harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death a ssociated with such unintended or unauthorized application. products described herein may be covered by one or more united states, international or foreign patents pending. product names and markings noted herein may also be covered by one or more united states, international or foreign trademarks. this document is written in english but may be translated into multiple languages for reference. only the english version of t his document is the final and determinative format released by diodes incorporated. life support diodes incorporated products are specifically not authorized for use as critical com ponents in life support devices or systems without the express written approval of the chief executive offi cer of diodes incorporated. as used herein: a. life support devices or syst ems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when proper ly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. b. a critical component is any component in a life support devic e or system whose failure to perform can be reasonably expect ed to cause the failure of the life support device or to affect its safety or effectiveness. customers represent that they have all necessary expertise in the safety and regulatory ramifi cations of their life support dev ices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-rel ated requirements concerning the ir products and any use of diodes incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or s ystems-related information or support that may be provided by diodes incorporated. further, customers must fully indemnify diodes incorporate d and its representatives against any damages arisi ng out of the use of diodes incorporated pr oducts in such safety-critical, life suppor t devices or systems. copyright ? 2014, diodes incorporated www.diodes.com
|
